Phantom Phuzzard Mod

[sn toter]

Hudd - badass man, how much would you charge to cut another set?

[Hudd]

I dont know exactly what all would you want?

[sn toter]

I dont know exactly what all would you want?

An aluminum pump handle.  Can you drill/tap threads too?  If so, I'd want one for the undercocking screw and one for a hitman rod. 

One more question.  Can you make a cylindrical foregrip that would mount to the front of the trigger guard like a VSC ASA? 

[Hudd]

I could do the handel and I can tap the threads I will have to look at it and do some measrements to see what all would be needed to tap it for the stock cocking rod. I migh tnot be able to do that part because my drillpress is not tall enough. The price would be chaep. probably material, shipping and $25.

[sn toter]

I could do the handel and I can tap the threads I will have to look at it and do some measrements to see what all would be needed to tap it for the stock cocking rod. I migh tnot be able to do that part because my drillpress is not tall enough. The price would be chaep. probably material, shipping and $25.

I'd even be fine with a shorter pump handle if that helps with the tapping.  I'm jealous of your tools, sir!  I WISH I had access to those things! 

Here's one more for you... Can you also make an Lstock(straight stock off the gripframe, no angle, with an 'L' going up 90* at the back end?  Or a Tstock if it's easier.  LMK, I'll be happy to throw the money at you for this stuff.

[Hudd]

That can be done. it may be a few weeks till I can actually start on this type of stuff. I dont have any spare time right now with school. but thanks giving break is coming up.

[sn toter]

That can be done. it may be a few weeks till I can actually start on this type of stuff. I dont have any spare time right now with school. but thanks giving break is coming up.

No hurry, it's a winter project.  Wait till youg et a big break

[Hudd]

sounds good