Acepilot1023
Private
Repuation: +0/-0
 Offline
Posts: 60
|
 |
« on: October 28, 2009, 03:47:37 AM » |
|
My new X7 w/ Qloader is in! Woot! But it looks as if it has been through hell and back. There is paint all over it, the recievers have pits in them, and the pits are still bad even after a quick internal polishing... Im thinking about keeping this one as well. I ordered another right side reciever, as to put the Qloader on, you must grind off parts that make the Cyclone work. Also, when the previous owner took out the banjo fitting for the cyclone, he didnt plug the hole, so every time you shoot, CO2 comes spraying out the side. Qloader needed a 90o low profile elbow to make it work right. I tell you, the fill station for the Qloaders suck... The tank that came with it is a 48/3000 made in May this year, so I am kinda happy about that. Also, got the stock Cyclone that was removed off that marker, a proto woodland mask, 2 barrel condoms, and a squeegee.
Currently on order:
Tiberius 8.1
First Strike Paint - 5 tubes
Lapco 11.5" Apex Ready Barrel
Tippmann X7 Stock Front Shroud
RAP4 X7 drop forward with on/off
Push Pins for the Shroud
Tank and Pod harness that will fit my 68/4500
That Feed Elbow for the Qloader
A New power tube ( Forgot to put in push pin in new X7 for the tombstone... VERY bad idea. That mistake cost me 7.55 plus S&H )
Dual Banjo fittings
Power Tube Plugs
Did I miss anything??
|
